ABB ACS560 - Page 44

Diagnostics
Displays the active faults and warnings and how to fix and reset. For information
about fault and warning codes, see section Diagnostics (page 139).
1
3
2
4
Active Fault - Displays active faults.1
Fault History - Lists the fault history.2
Active Warnings - Displays active warnings.3
I/O status - I/O settings.4
Energy Efficiency
Optimizes the motor flux so that total energy consumption and motor noise level
are reduced when drive operates below the nominal load.
1
2
4
3
5
Saved energy in kWh - Energy saved in kWh compared to direct-on-line motor
connection.
1
Saved money - Monetary savings compared to direct-on-line motor connection.2
Saved energy in MWh - Energy saved in MWh compared to direct-on-line motor
connection.
3
Saved money x 1000 - Monetary savings in thousands compared to direct-on-line
motor connection.
4
Cost per kWh - Energy cost (in INR) per kWh.5
44 EN - Quick installation and start-up guide
EN
HI