ABB ACS560 - Page 56

DefaultUnitRange/ListNameIndex
NameBitNameBitNameBit
Reserved8Overcurrent
flt
4Any warning
or fault
0
Device over-
temp flt
9Reserved5Any warning1
Reserved10...15DC over-
voltage
6Any fault2
DC under-
voltage
7Reserved3
0b0000-0b0000...0b1111Diagnostic word 205.21
NameBitNameBitNameBit
Reserved11...15Motor over-
temp flt
10Reserved0...9
0b0000-0b0000...0b1111Diagnostic word 305.22
NameBitNameBitNameBit
Reserved12...15Reserved10Reserved0...8
Fan com-
mand
11kWh pulse9
0.00rpm-30000.00...30000.00Motor speed at fault05.80
0.00Hz-500.00...500.00Output frequency at fault05.81
0.00V0.00...2000.00DC voltage at fault05.82
0.00A0.00...30000.00Motor current at fault05.83
0.0%-1600.00...1600.00Motor torque at fault05.84
0x0000-See parameter 06.11
Main status word.
Main status word at fault05.85
0b0000-See parameter 10.02 DI
delayed status.
DI delayed status at fault05.86
0°C-40...160Inverter temperature at
fault
05.87
0.00Hz-30000.00...30000.00Reference used at fault05.88
56 Parameter listing
EN
HI