ABB ACS560 - Page 85

DefaultUnitRange/ListNameIndex
Fault/Fault [0]-Supply phase lossSTO indication run/stop31.22
Fault/Event[2]Fault/Warning[1]Fault/Fault[0]
No indication/No indica-
tion[5]
Event/Event[4]Warning/Warning[3]]
Fault[1]-No action[0], Fault[1]Wiring or earth fault31.23
No action[0]-No action[0], Warn-
ing[1], Fault[2]
Stall function31.24
200.0%0.0 … 1600.0Stall current limit31.25
150.00rpm0.00 … 10000.00Stall speed limit31.26
15.00Hz0.00 … 1000.00Stall frequency limit31.27
20s0…3600Stall time31.28
500.00rpm0.00 … 10000.00Over-speed trip margin31.30
15.00Hz0.00 … 10000.00Frequency trip margin31.31
Warning[1]-Fault[0], Warning[1], No
action[2]
Main fault function31.35
Warning[1]-Fault[0], Warning[1], No
action[2]
Aux fan fault function31.36
Note: This parameter
is only applicable for
frames R3 or larger.
0000h-000h...FFFhDisable warning messages31.40
NameBitNameBit
Emergency stop
(off2)
5Reserved0
Emergency stop
(off1 or off3)
6DC link under-
voltage
1
Reserved7...15Reserved2...4
Parameter listing 85
EN
HI