ABB ACS560 - Page 97

DefaultUnitRange/ListNameIndex
On when drive running[2]On[1]Off[0]
AI2 percent[9]-0...3, 8...10Set 1 feedback 1 source40.08
Feedback data stor-
age[10]
Freq in scaled[3]Not selected[0]
Other.AI1 percent[8]AI1 scaled[1]
AI2 percent[9]AI2 scaled[2]
Not selected[0]-See parameter 40.08
Set 1 feedback 1 source
Set 1 feedback 2 source40.09
In1[0]-0...11Set 1 feedback function40.10
sqrt(In1-In2)[9]MAX(In1,In2)[6]In1*In2[3]In1[0]
sqrt(In1+In2)[10]AVE(In1,In2)[7]In1/In2[4]In1+In2[1]
sqrt(In1)+sqrt(In2)[11]sqrt(In1)[8]MIN(In1,In2)[5]In1-In2[2]
0.000s0.000 … 30.000Set 1 feedback filter time40.11
0.00--200000.00...200000.00Set 1 setpoint scaling40.14
0.00--200000.00...200000.00Set 1 output scaling40.15
AI1 percent[11]-0, 2...4, 8, 10...16, 19, 20,
24
Set 1 setpoint 1 source40.16
EFB ref1[19]Control panel (ref
saved)[13]
Motor potentiomet-
er[8]
Not selected[0]
EFB ref2[20]Control panel (ref
copied)[14]
Freq in scaled[10]Internal setpoint[2]
Setpoint data stor-
age[24]
FB A ref1[15]AI1 percent[11]AI1 scaled[3]
Other...FB A ref2[16]AI2 percent[12]AI2 scaled[4]
Not selected[0]-See parameter 40.16
Set 1 setpoint 1 source
Set 1 setpoint 2 source40.17
In1[0]-See parameter 40.10
Set 1 feedback function
Set 1 setpoint function40.18
Not selected[0]-0...7, 18...23Set 1 internal setpoint sel140.19
Parameter listing 97
EN
HI