ABB ACS880-17 - Page 124

124 Parameters
04.15 5th latest fault Code of the 5th stored (non-active) fault. -
0000h…FFFFh 5th stored fault. 1 = 1
04.16 Latest warning Code of the 1st stored (non-active) warning. -
0000h…FFFFh 1st stored warning. 1 = 1
04.17 2nd latest warning Code of the 2nd stored (non-active) warning. -
0000h…FFFFh 2nd stored warning. 1 = 1
04.18 3rd latest warning Code of the 3rd stored (non-active) warning. -
0000h…FFFFh 3rd stored warning. 1 = 1
04.19 4th latest warning Code of the 4th stored (non-active) warning. -
0000h…FFFFh 4th stored warning. 1 = 1
04.20 5th latest warning Code of the 5th stored (non-active) warning. -
0000h…FFFFh 5th stored warning. 1 = 1
04.21 Fault word 1 ACS800-compatible fault word 1.
The bit assignments of this word correspond to FAULT WORD
1 in the ACS800. Parameter 04.120 Fault/Warning word
compatibility determines whether the bit assignments are
according to the ACS800 Standard or ACS800 System control
program.
Each bit can indicate several ACS880 events as listed below.
This parameter is read-only.
-
0000h…FFFFh ACS800-compatible fault word 1. 1 = 1
No. Name/Value Description Def/FbEq16
Bit
ACS800 fault name
ACS880 events indicated by this bit
(see Fault tracing, page 497)
(04.120 = ACS800
Standard ctrl
program)
(04.120 = ACS800
System ctrl
program)
0 SHORT CIRC SHORT CIRC 2340
1 OVERCURRENT OVERCURRENT 2310
2 DC OVERVOLT DC OVERVOLT 3210
3 ACS800 TEMP ACS800 TEMP 2381, 4210, 4290, 42F1, 4310, 4380
4 EARTH FAULT EARTH FAULT 2330, 2392, 3181
5 THERMISTOR MOTOR TEMP M 4981, 4991, 4992, 4993
6 MOTOR TEMP MOTOR TEMP 4982
7 SYSTEM_FAULT SYSTEM_FAULT
6481, 6487, 64A1, 64A2, 64A3, 64B1, 64E1,
6881, 6882, 6883, 6885
8 UNDERLOAD UNDERLOAD -
9 OVERFREQ OVERFREQ 7310
10 Reserved MPROT SWITCH 9081
11 Reserved CH2 COMM LOSS 7582
12 Reserved SC (INU1) 2340 (XXYY YY01)
13 Reserved SC (INU2) 2340 (XXYY YY02)
14 Reserved SC (INU3) 2340 (XXYY YY03)
15 Reserved SC (INU4) 2340 (XXYY YY04)