ABB ACS880-17 - Page 426

426 Parameters
96.55 Checksum control
word
Bits 0…3 select to which approved checksums (out of
96.56…96.59) the actual checksum (96.53) is compared.
Bits 4…7 select an approved (reference) checksum
parameter (96.56…96.59) into which the actual checksum
from parameter 96.53 is copied.
00000000b
00000000b…
11111111b
Checksum control word. 1 = 1
96.56 Approved
checksum 1
Approved (reference) checksum 1. 0h
00000000h…
FFFFFFFFh
Approved checksum 1. -
96.57 Approved
checksum 2
Approved (reference) checksum 2. 0h
00000000h…
FFFFFFFFh
Approved checksum 2. -
96.58 Approved
checksum 3
Approved (reference) checksum 3. 0h
00000000h…
FFFFFFFFh
Approved checksum 3. -
96.59 Approved
checksum 4
Approved (reference) checksum 4. 0h
00000000h…
FFFFFFFFh
Approved checksum 4. -
No. Name/Value Description Def/FbEq16
Bit Name Description
0 Approved checksum 1 1 = Enabled: Checksum 1 (96.56) is observed.
1 Approved checksum 2 1 = Enabled: Checksum 2 (96.57) is observed.
2 Approved checksum 3 1 = Enabled: Checksum 3 (96.58) is observed.
3 Approved checksum 4 1 = Enabled: Checksum 4 (96.59) is observed.
4 Set approved checksum 1 1 = Set: Copy value of 96.53 into 96.56.
5 Set approved checksum 2 1 = Set: Copy value of 96.53 into 96.57.
6 Set approved checksum 3 1 = Set: Copy value of 96.53 into 96.58.
7 Set approved checksum 4 1 = Set: Copy value of 96.53 into 96.59.
8…15 Reserved