Product Familiarization 2-53AXD50000011888
2.5.2 Overview of Power and Control Connections
The diagram shows the power connections and control interfaces of the drive.
Figure 2-4
Table 2-3
1 Option modules can be inserted into slots 1, 2 and 3 as follows:
2 Modules Into slots
3 Analog and digital I/O extension modules except FDIO 1, 2, 3
Feedback interface modules 1, 2, 3
Fieldbus communication modules and FDIO 1, 2, 3
Safety functions modules 2
See section Type designation key
4 Memory unit
5 Connector for safety functions modules (alternative to Slot 2)
6 Default I/O connection diagram and Control unit (ZCU-12) connection data
7 See Control panel
8 du/dt, common mode or sine lter (optional)
To Next Page
Loading...
