ABB ACS880+N5350 - D.7 Installing the Drive; D.7.1 Frames R1 to R4

Mechanical Installation D-93AXD50000011888
D.7 Installing the Drive
These instructions are for drives without vibration dampers. For drives with vibration dampers (option +C131), see the
additional instructions (included with the dampers and on the manuals CD).
D.7.1 Frames R1 to R4
1. See the dimensions in chapter Dimension drawings. Mark the locations for the four mounting holes.
2. Drill the mounting holes.
3. Start the screws or bolts into the mounting holes.
4. Position the drive onto the screws on the wall.
5. Tighten the screws in the wall securely.
Figure D-10
× 4
× 4
× 4
× 4
1 2 3
5
Screw size
R1 M5
R2 M5
R3 M5
R4 M5
4