ABB ACSM1 Control Panel User Manual

Operation
41
How to view information about the backup
Step Action Display
1. Go to the Main menu by pressing if you are in the Output mode, otherwise
by pressing repeatedly until you get to the Main menu.
2. Go to the Par Backup option by selecting PAR BACKUP on the menu with keys
and , and pressing .
3. Select SHOW BACKUP INFO on the Par Backup with keys and ,
and press . The display shows the following information about the drive
from where the backup was made:
BACKUP INTERFACE VER: Format version of the backup file
FIRMWARE VERSION: Information on the firmware
UMFI: Firmware of the ACSM1 drive
1330: Firmware version (e.g. 1.330)
0: Firmware patch version
PRODUCT VARIANT: 1: ACSM1 Speed
2: ACSM1 Motion
You can scroll the information with keys and .
4. Press to return to the Par Backup.
MENU
EXIT
FAULT LOGGER
TIME & DATE
PAR BACKUP
EXIT ENTER00:00
MAIN MENU 4
LOC
ENTER
MAKE BACKUP TO PANEL
SHOW BACKUP INFO
RESTORE PARS ALL
RESTORE PARS NO-IDRUN
RESTORE PARS IDRUN
EXIT
SEL00:00
PAR BACKUP 2
LOC
SEL
LOC
EXIT
00:00
BACKUP INTERFACE VER
0.2
0.2
FIRMWARE VERSION
UMFI, 1330, 0,
BACKUP INFO
EXIT 00:00
FIRMWARE VERSION
UMFI, 1330, 0,
UMFI, 1330, 0,
PRODUCT VARIANT
2
BACKUP INFO
LOC
EXIT
MAKE BACKUP TO PANEL
SHOW BACKUP INFO
RESTORE PARS ALL
RESTORE PARS NO-IDRUN
RESTORE PARS IDRUN
EXIT
SEL00:00
PAR BACKUP 1
LOC

ABB ACSM1 Control Panel Specifications

General

Brand	ABB
Model	ACSM1 Control Panel
Category	Control Panel
Language	English