Manual for High Voltage Process Performance Motors
8 - Transport and Unpacking
3BFP 000 063 R0101 REV D
NOTE: Check that eyebolts or the lifting lugs integrated with the machine frame are
undamaged before lifting. Damaged lifting lugs must not be used.
NOTE: Lifting eyebolts must be tightened before lifting. If needed the position of the eyebolt
must be adjusted with suitable washers.
2.2.1 Lifting a machine in a seaworthy package
The seaworthy package is normally a wooden box, which is covered with lamina paper on the
inside. The seaworthy package should be lifted by forklift from the bottom, or by crane with
lifting slings. The sling positions are painted on the package.
To Next Page
Loading...
