ABB AW400 Series - Mounting Options; Wall Mounting Instructions

11
3.2 Mounting
AW400 is available with the hardware for the following types of mountings:
• Wall mounting (Fig. 2)
• 2” pipe mounting (Fig. 3)
3.2.1 Wall mounting
A
W400 wall mounting
Caution ! Danger
Follow instructions written on
Instruction Bulletin.
120 (4.8”)
cover for terminal
board wiring
Minimum distance
for cover opening
Power supply cable
!
allow enough
clearance for wiring
!
180 (7.2”)
allow enough
clearance for wiring
n°2 holes ø 6,5 for wall mounting
(n°2 screws c/w inserts for wall
mounting are supplied)
Power supply cable.
!
Caution ! Danger
F
ollow instructions written on
Instruction Bulletin.
800 (32”)
minimum
clearance
0.00
n°2 slots 6,5 - R. 3,25
(n°2 screws c/w inserts
supplied for wall mounting)
500
(20”)
minimum
clearance
1600 (64
”
)approx
Installation height from floor level
1500 (60”)
Fig. 2 - Typical Wall-mounting Installations of AW400