ABB AW400 Series - Page 21

19
In case not all the connections are required, the most important rules to follow are:
• never run cable for power supply with other cables
• never run analog I/O cables with other cables
• never run CCO cables or wires with other cables
Pleases notice that cable gland for power supply cable includes the cable protector: this avoids dangerous
cable abrasion and bending at the point of its inlet in the transmitter.
ANO1
ANO2
ANO3
ANI1 ANI2 ANI3
Power Suppl
y
Serial communication
CCO1–7
ANI 1,2
CCI1
–
2
Fig. 8 – Recommended use of cable glands