22 AZ10 OXYGEN ANALYZER | COMBUSTION GAS ANALYSIS | OI/AZ10-EN REV. A
…7 Electrical connections
Cable preparation – AutoCal systems (both ends)/AZ10 AutoCal unit to AZ10 transmitter
WARNING
Bodily injury.
• The 14-core AZ10 cable carries the screened signal wires
wires safely.
Referring to Figure 19:
1 Before preparing cable ends, slide a cable gland onto each
end of the cable in the correct orientation.
2
3
exposed. Do not cut back Screen 2 drain wire.
4
Do not cut back Screen 1 drain wire.
5
6 Cut the insulation back on each of the remaining wires to
Figure 19 Cable preparation – AutoCal systems (both ends)/AZ10 AutoCal unit to AZ10 transmitter
AZ10 AutoCal unit
AZ10 transmitter
Screen 2
Screen 1 foil*
Cable from probe
see page 21
Screen 2 braid
Screen 1*
Cut PVC outer cable sheath back
twisted together and
Violet
Grey
Red
Black
Green
White
Brown
Blue
White/Yellow
White/Black
White/Orange
White/Green
White/Red
White/Blue
To Next Page