4
4 CONFIGURATION
4.1 Profile Program Page
Information.
• This page is inaccessible when a profile is running.
• Up to 9 programs for the C300/C310 (3 for the C301, 20 for the C302).
• Total of 30 segments for the C300/C310 (12 for the C301, 99 for the C302).
• Guaranteed Ramp/Soak feature.
• Repeat facility for each program.
Eng.
Units
S1
S2 S3
S4 S5
L1
L2 L3 L4 L5
Program 1
Program 2
Start at S1
Start at S2 End at S5
Time
Overall Profile
End at S3
Segment
Numbers
L0
Levels:
Page Header – Profile Program.
Profile Enable
Select the profile function, on or OFF.
Program Select
Select the program required, between 1 and 9 (3 for C301, 20
for C302).
A program consists of up to 30 (12 for C301, 99 for C302)
segments. Each segment has a starting and finishing set
point level, giving a maximum of 31 (13 for C301, 100 for
C302) levels. For identification purposes these levels are
numbered 0 to 30 (12 for C301, 99 for C302), e.g.:
Level 1 is the finishing level of segment 1 and the
starting level of segment 2
Level 10 is the finishing level of segment 10 and the
starting level of segment 11.
Program Begin (start level)
This is the first level number of the program selected at
Program Select above.
Set the program start level number for the program chosen
at Program Select, between 0 and 29 (11 for C301, 98 for
C302).
Continued on next page.
OFF
1
PrOFLE
PrOFLE
ON
OFF
0
PG–bEG
PrOGrM
PrOGrM
To Next Page
Loading...
