PRODUCTS & CUSTOMER SUPPORT
A Comprehensive Product Range
Analytical Instrumentation
• Transmitters
On-line pH, conductivity, and dissolved oxygen
transmitters and associated sensing systems.
• Sensors
pH, redox, selective ion, conductivity and
dissolved oxygen.
• Laboratory Instrumentation
pH and dissolved oxygen meters and associated
sensors.
• Water Analyzers
For water quality monitoring in environmental,
power generation and general industrial
applications including: pH, conductivity, ammonia,
nitrate, phosphate, silica, sodium, chloride,
fluoride, dissolved oxygen and hydrazine.
• Gas Analyzers
Zirconia, paramagnetic, infrared, thermal
conductivity.
Controllers & Recorders
• Controllers
Digital display, electronic, pneumatic. Discrete
single-loop and multi-loop controllers which can
be linked to a common display station, process
computer or personal computer.
• Recorders
Circular and strip-chart types (single and multi-
point) for temperature, pressure, flow and many
other process measurements.
Electronic Transmitters
• Smart & Analog Transmitters
For draft, differential, gauge and absolute
pressure measurement. Also, liquid level and
temperature.
• I to P Converters and Field Indicators
Flow Metering
• Magnetic Flowmeters
Electromagnetic, insertion type probes and
watermeters.
• Turbine Flowmeters
• Wedge Flow Elements
• Mass Flow Meters
Transmitters, sensors, controllers and batch/
display units.
Level Control
• Submersible, Capacitance & Conductivity.
Pneumatic Instrumentation
• Transmitters
• Indicating Controllers
• Recording Controllers
Customer Support
ABB Instrumentation provides a comprehensive after
sales service via a Worldwide Service Organization.
Contact one of the following offices for details on your
nearest Service and Repair Centre.
United Kingdom
ABB Instrumentation Limited
Tel: +44 (0)1480 475321
Fax: +44 (0)1480 470787
United States of America
ABB Automation Inc.
Instrumentation Division
Tel: +1 215-674-6000
Fax: +1 215-674-7183
Italy
ABB Instrumentation SpA
Tel: +39 (0) 344 58111
Fax: +39 (0) 344 58278
Client Warranty
Prior to installation, the equipment referred to in
this manual must be stored in a clean, dry
environment, in accordance with the Company's
published specification. Periodic checks must be
made on the equipment's condition.
In the event of a failure under warranty, the
following documentation must be provided as
substantiation:
1. A listing evidencing process operation and
alarm logs at time of failure.
2. Copies of operating and maintenance records
relating to the alleged faulty unit.
To Next Page
Loading...
