ABB DCS 500B - Compatibility of SDCS-PIN-20 X Boards; Compatibility of SDCS-PIN-20 X and SDCS-PIN-2 X Boards

Chapter 10 - Service
VI A 10 - 2 DCS 500 / DCS 600 Service Manual
Compatibility of
SDCS-PIN-20x
boards
The SDCS-PIN-20xB boards replaces SDCS-PIN-20xA and SDCS-
PIN-20x boards, but not vice versa.
Note: SDCS-PIN-20xA replaces SDCS-PIN-20x, but not vice versa.
U
AC
400V/500V 600V
I
DC
100A-350A 405A-520A 700A 610A-1000A 100A-270A 405A/450A
Type C1/C2 C2 C2 C2b C1/C2 C2
SDCS-PIN-205B
   
- -
SDCS-PIN-206B
- - - -
 
SDCS-PIN-21

- - - - -
SDCS-PIN-22 -
 1
- - - -
SDCS-PIN-23 - - - -

-
SDCS-PIN-24 - - - - -
 1
SDCS-PIN-25 - -
 2
- - -
SDCS-PIN-205A/205
  
- - -
SDCS-PIN-206A/206 - - - -
 
: possible
- : not possible
1 together with SDCS-PIR-21 2 together with RC network
Table 10-1 Compatibility of SDCS-PIN-2xx boards
Compatibility of
SDCS-PIN-20x and
SDCS-PIN-2x boards
Converters 100A ≤ I
DC
≤ 350A and U
AC
: 400V/500V
- SDCS-PIN-21 or
- SDCS-PIN-205B/205A/205 can be used as spare parts.
Converters 405A ≤ I
DC
≤ 520A and U
AC
: 400V/500V
- SDCS-PIN-22 together with SDCS-PIR-21 or
- SDCS-PIN-205B/205A/205 can be used as spare parts.
Converters I
DC
= 700A and U
AC
: 400V/500V (type C2)
- SDCS-PIN-25 together with RC network (possible only in
converters with an A in their serial number) or
- SDCS-PIN-205B/205A/205 can be used as spare parts (pos-
sible in converters with an A or B in their serial number). In
an A converter do not connect the RC network.
Note: In a B converter only SDCS-PIN205B/205A/205 boards
are usable, because the RC network is missing.
Converters 610A ≤ I
DC
≤ 1000A and U
AC
: 400V/500V (type C2b) only
- SDCS-PIN-205B can be used as spare part.
Converters 100A ≤ I
DC
≤ 270A and U
AC
: 600V
- SDCS-PIN-23
- SDCS-PIN-206B/206A/206 can be used as spare parts.
Converters I
DC
= 405A/450A and U
AC
: 600V
- SDCS-PIN-24 together with SDCS-PIR-21 or
- SDCS-PIN-206B/206A/206 can be used as spare parts.
Note: In addition to above mentioned limitations make sure that
the resistors are cut properly according to the table ‘Settings of
the SDCS-PIN-20xB board’ as described in the manual Techni-
cal Data. Especially when a board is reused!
3ADW000093R0701_DCS500B/DCS600_Service manual_e_g