17
Introduction
3ADW000195R0501 DCS800 Service Manual e e
components of the DCS800, their connections and settings (e.g. jumpers)
The DCS800 Firmware Description (3ADW000193) gives an overview of the
DCS800 firmware, describes all parameters, describes the function of the DCS
Control Panel, gives support in case of faults and alarms and gives information
about communication.
The above listed documentation can be found on the CD-ROM being attached to
the DCS800 Quick Guide (3ADW000191).
Storage and transport
If the unit has been in storage prior to installation or is transported to another
location, care must be taken to ensure that the environmental conditions are
complied with (see Hardware Manual).
Name plate and type code
For purposes of identification, each thyristor power converter is fitted with name
plates, stating the type code and the serial number, which serve for each unit's
individual identification.
The type code contains information about the characteristics and the configuration
of the unit.
ABB Automation Products
U
1
3 525 V
U
2
610 V
Made in Germany
Type: DCS800-S02-0025-05
I
1
20 A I
2
25 A
f
1
50/60 Hz I
f
6 A
Ser No: 0025421A06294264
SCC
To Next Page
Loading...
