94
Service
3ADW000195R0501 DCS800 Service Manual e e
DCS800 firmware download
General
This chapter describes how to download firmware into the SDCS-CON-4 and
SDCS-COM-8.
Download SDCS-CON-4 firmware
Requirements:
The Hitachi Flash Development Toolkit 2.2 has to be installed.
A recent workspace including firmware file and text file should be saved on the
PC.
Workspaces
ABB provides workspaces called DCS800.fdt. New workspaces have to be saved
in:
C:\ABB\DCS800\Firmware\CON-4\Ver x.x
Firmware / text file
The firmware consists of two parts. The firmware file itself and the text file. New
firmware files (*.rec) have to be saved in:
C:\ABB\DCS800\Firmware\CON-4\Ver x.x\Firmware
To Next Page
Loading...
