9
Safety instructions
3ADW000195R0101 DCS800 Service Manual e a
3ADW000195R0501 DCS800 Service Manual e e
Mechanical installation
These notes are intended for all who install the drive. Handle the unit
carefully to avoid damage and injury.
WARNING!
• DCS800 sizes D4 ... D7: The drive is heavy. Do not lift it alone. Do
not lift the unit by the front cover. Place units D4 and D5 only on its
back.
DCS800 sizes D5 ... D7: The drive is heavy. Lift the drive by the
lifting lugs only. Do not tilt the unit. The unit will overturn from a tilt
of about 6 degrees.
• Make sure that dust from drilling does not enter the drive when
installing. Electrically conductive dust inside the unit may cause
damage or lead to malfunction.
• Ensure sufficient cooling.
• Do not fasten the drive by riveting or welding.
To Next Page
Loading...
