ABB FENA-01 - Page 20

Drive configuration
20
Table 2. FENA-01 Configuration Parameters - Group B (Group 2)*
*Actual parameter group number depends on the drive type. Eg,
group B (group 2) equals to parameter group 55 in ACS350 and
ACS355, and group 53 in ACSM1, ACS850 and ACQ810.
** Number of parameters in this group may vary by drive.
Par.
no.
**
Parameter name Alternative settings Default
setting
1DATA OUT 1
(client to drive)
0 to 9999
Format: xxyy, where
xx = parameter group and
yy = parameter index.
0
2 DATA OUT 2 See DATA OUT 1 above. 0
3 DATA OUT 3 See DATA OUT 1 above. 0
4 DATA OUT 4 See DATA OUT 1 above. 0
5 DATA OUT 5 See DATA OUT 1 above. 0
6 DATA OUT 6 See DATA OUT 1 above. 0
7 DATA OUT 7 See DATA OUT 1 above. 0
8 DATA OUT 8 See DATA OUT 1 above. 0
9 DATA OUT 9 See DATA OUT 1 above. 0
10 DATA OUT 10 See DATA OUT 1 above. 0
11 DATA OUT 11 See DATA OUT 1 above. 0
12 DATA OUT 12 See DATA OUT 1 above. 0