Communication profiles
35
*Not supported with ACS350/355
10 ABOVE_
LIMIT
1 Actual frequency or speed equals or exceeds
supervision limit (set by drive parameter). Valid in
both directions of rotation.
0 Actual frequency or speed within supervision limit.
11 EXT_CTRL_
LOC
1 External Control Location EXT2 selected.
0 External Control Location EXT1 selected.
13 to
14
Reserved or freely programmable status bits*
15 1 Communication error detected by fieldbus adapter
module.
0 Fieldbus adapter communication OK.
Bit Name Value STATE/Description
To Next Page
Loading...
