ABB FSM4000 - Nominal Diameter, Nominal Pressure, Measuring Range

FSM4000 ELECTROMAGNETIC FLOWMETER | DS/FSM4000-EN REV. L
25
Main order number
Electromagnetic Flowmeter FSM4000
SE41F
-
XXX X X X X X X X X X X X X X XXX XXX
Certificates
PED St
andard A
Material certificate 3.1 acc. EN 10204 with pressure test acc. AD2000
D
14)
Pressure test acc. AD2000
G
Inspection certificate 3.1 acc. EN 10204
F
Calibration Certificates
Standard
A
Finger
print saved at factory F
15)
Schutzart / Kabelzuführung
IP 67 / Thread for screw
-type conduit fitting M20 x 1.5 2
IP 67
/ Thread for screw-type conduit fitting NPT 1/2 in 4
IP 68
/ Thread for screw-type conduit fitting M20 x 1.5 7
16)
IP 68 / Cable connected and connection box potted
8
IP 68
/ Cable connected and connection box potted NPT 1/2 in A
Design
Without pre-amplifier
1
17)
With pre
-amplifier type A 2
18)
With pre
-amplifier type B 4
19)
Name Plate Language / Type
German / Adhesive foil
G
English / Adhesive foil
E
French / Adhesive foil
F
German / Stainless steel
J
English / Stainless steel
K
French / Stainless steel
L
Design Level
(Specified by ABB)
x
Lay Length
Short, acc. ISO 13359
A
Electrode Design
Standard
1
Conical head, AISI 904L SST (1.4539)
2
20)
Swedish design, Hastelloy C
-4 (2.4610) 3
21)
14) Material certificate for meter tube and flanges
15) > DN8 (5/16 in)
16) Sealing compound (optional): D141B038U01
17) From DN 10 (3/8 in) >= 20 μS/cm
18) Standard up to DN 8 (5/16 in) >= 20 μS/cm, option > DN 8 (5/16 in) >= 5 μS/cm and cable length max. 200 m (660 ft)
19) Option: Up to DN 8 (5/16 in) >= 5 µS/cm, > DN 8 (5/16 in) >= 0.5 µS/cm and cable length max. 200 m (660 ft)
20) For application e.g. with high fat contents
21) DN 50 ... DN 400 (2 ... 16 in), for pulp applications with high resin contents
Continued on next page