ABB FEW series User Manual

User Guide OI/FEF/FEV/FEW–EN Rev. D
F, V, W Series
Electromagnetic flowmeter
Full-bore flow sensors
The perfect fit for all water
industry applications
Introduction
ABB’s full-bore FEF, FEV and FEW electromagnetic
flowmeter sensors are available with either an
AquaMaster 3 or a WaterMaster transmitter.
AquaMaster 3 and WaterMaster are a range of high
performance electromagnetic flowmeters for the
measurement of electrically conductive fluids and are
supplied as factory-configured and calibrated systems.
This User Guide provides end-user details for installation
and connection.
This User Guide should be used in conjunction with the
following publications:
– AquaMaster 3 FET200 electromagnetic flowmeter
transmitter User Guide (OI/FET200–EN)
– WaterMaster FET100 electromagnetic flowmeter
transmitter User Guide (OI/FET100–EN)
– WaterMaster FET100 electromagnetic flowmeter /
transmitter Hazardous areas ATEX / IECEx areas 2,
21 and 22 User Guide (OI/FET100/ATEX–EN)

ABB FEW series Specifications

General

Brand	ABB
Model	FEW series
Category	Measuring Instruments
Language	English

Summary

Safety

Electrical Safety

Details on electrical safety requirements and compliance with standards.

Health & Safety

Guidelines for safe operation, installation, and maintenance of the equipment.

Mechanical Installation

Installation Conditions

Environmental and operational conditions required for proper installation.

Electrical Installation

Grounding

Guidance on correct grounding and bonding for safety and performance.

Cable Preparation (Remote Transmitter)

Instructions for preparing sensor cables for remote transmitter connections.

Sensor Cable Connections (AquaMaster 3)

Environmental Protection

Specification

Functional Specification

Physical Specification

Sensor Dimensions

FEW - DN10 to 125

FEW - DN150 to 400

FEV - DN40 to 200

FEF - DN80 to 600