Need help?Do you have a question about the ABB FEX300 and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | FEX300 |
| Category | Measuring Instruments |
| Language | English |
Provides essential safety instructions and notes for proper installation, operation, and maintenance.
Defines the specific applications and purposes for which the device is designed.
Lists actions and conditions considered improper use of the device, potentially voiding warranty.
Specifies that installation and maintenance must be performed by trained personnel.
Outlines conditions under which the manufacturer's liability and warranty are voided.
Explains safety/warning symbols and details found on the device's name plate.
Provides safety guidelines for handling and transporting the device.
Details crucial safety instructions to be followed during the installation process.
Covers safety precautions related to electrical connections and installations.
Outlines safety measures to be observed during the operation of the device.
Specifies operating limits for pressure, temperature, and electromagnetic fields.
Lists guidelines for selecting and using fluids for measurement with the device.
Provides safety instructions for performing maintenance and inspection tasks.
Details the procedures and precautions for returning devices for repair or calibration.
Describes ABB's commitment to quality, environmental, and safety management systems.
Provides information on the environmentally friendly disposal of the product.
Explains the electromagnetic induction principle used for flow measurement.
Details the different series and models of the ProcessMaster and HygienicMaster.
Instructs users to check devices for damage upon receipt and document any transit issues.
Provides safety guidelines and methods for transporting smaller flanged units.
Details safe handling and lifting procedures for larger flanged units.
Specifies recommended conditions for storing the device to maintain its integrity.
Provides general guidelines and points to observe during device installation.
Specifies maximum tightening torques for flange connections based on material and lining.
Details requirements for ensuring compliance with EHEDG standards for hygienic installations.
Provides guidelines for achieving 3A conformity, particularly regarding mounting orientation.
Outlines specific requirements for installing the flowmeter sensor in various pipeline configurations.
Explains how to rotate the display and housing for optimal viewing and access.
Details various methods and considerations for properly grounding the device.
Guides on preparing and routing sensor and transmitter signal cables.
Provides instructions for connecting the flowmeter sensor and its cables.
Details the process of connecting the transmitter, including supply power and communication.
Lists essential checks to perform before initiating the commissioning process.
Explains how to configure the active/passive modes for the current output.
Guides on setting up and commissioning devices using the PROFIBUS PA protocol.
Provides instructions for commissioning devices using FOUNDATION Fieldbus.
Covers downloading system data and initial setup procedures for the device.
Describes how to operate the device via its LCD display and capacitive control buttons.
Explains the different menu levels: Process, Information, and Configuration.
Provides a hierarchical overview of all available parameters in the configuration level.
Details specific parameters, their value ranges, and descriptions, organized by menu.
Explains how to simulate various alarms for testing and verification purposes.
Lists software versions and their corresponding changes and operating instructions.
Introduces extended diagnostic functions available for specific models.
Details the procedure for checking the electrical grounding of the device.
Provides recommended limit values for various diagnostic parameters.
Explains how to access detailed information about error messages displayed on the LCD.
Lists error codes, LCD text, causes, and remedies for various error conditions.
Provides a summary table of error states, their behavior across outputs, and maskability.
Provides maintenance checks for the flowmeter sensor and guidelines for repairs.
Details gasket requirements for preventing leaks and ensuring conformity.
Guides on the correct procedure for replacing the transmitter or flowmeter sensor.
Lists part numbers for fuses used in the transmitter electronics.
Lists common spare parts for the compact design of the flowmeter.
Lists spare parts specific to the field-mount housing of the remote design.
Details reference conditions, measuring error, and analog output effects.
Specifies the reproducibility and response time characteristics of the current output.
Covers electrical properties, mechanical properties, and vibration specifications for the transmitter.
Details sensor protection types, pipeline vibration, installation length, and temperature ranges.
Details sensor protection types, pipeline vibration, installation length, and temperature ranges.
Lists related documents for further information and specifications.
Summarizes European directives and certifications relevant to the meter.
Provides a table of factory default settings for various parameters.
To Next Page
