ABB FEX300 - Transport of Flanged Units Larger than DN 400; Storage Conditions

Transport and storage
OI/FEX300/FEX500-EN FEX300, FEX500 21
3.3 Transport of flanged units larger than DN 400
Attention - Potential damage to device!
Use of a forklift to transport the device can bend the housing and damage the internal magnet
coils.
Flanged units may not be lifted at the middle of the housing when transporting via forklift.
Flanged units may not be lifted by the terminal box or at the middle of the housing. Use only the
eye bolts on the device to lift and install it in the pipeline.
Fig. 8: Transport of flanged units larger than DN 400
3.4 Storage conditions
When storing the unit, please note the following points.
• Store the unit in its original packaging in a dry and dust-free location.
• Avoid storing the unit in direct sunlight.