ABB FEX300 - Switching to the Information Level (Operator Menu)

Parameterization
OI/FEX300/FEX500-EN FEX300, FEX500 75
7.2.2 Switching to the information level (operator menu)
On the information level, the operator menu can be used to display diagnostic information and
choose which operator pages to display.
Process display
1. Use
to switch to the information level.
Operator Menu
Diagnostics
Operator Page 1
Operator Page 2
Back Select
2. Use
or to select a submenu.
3. Use
to confirm your selection.
Menu Description
... / Operator Menu
Diagnostics Selects the "Diagnostics" submenu, see also Chapter
7.2.2.1 "Error messages on the LCD display".
Operator Page 1 Selects the operator page to be displayed
Operator Page 2
Operator Page 3
Operator Page 4
Autoscroll
When "Multiplex Mode" is enabled, this initiates automatic
switching of the operator pages on the process display.
Signals View
Selects the "Signals View" submenu (for service, only).