ABB FEX300 - Appendix; Other Applicable Documents; Approvals and Certifications

Appendix
168 FEX300, FEX500 OI/FEX300/FEX500-EN
15 Appendix
15.1 Other applicable documents
• Data Sheet for ProcessMaster (DS/FEP300, DS/FEP500)
• Data Sheet for HygienicMaster (DS/FEH300, DS/FEH500)
• Commissioning Instruction (CI/FEX300/FEX500)
• Ex Safety Instructions ATEX/IEC (SM/FEX300/FEX500/ATEX/IECEX)
• Ex Safety Instructions FM/CSA (SM/FEX300/FEX500/FM/CSA)
• HART Interface Description (COM/FEX300/FEX500/HART)
• PROFIBUS PA Interface Description (COM/FEX300/FEX500/PB)
• FOUNDATION Fieldbus Interface Description (COM/FEX300/FEX500/FF)
15.2 Approvals and certifications
CE mark
The version of the meter in your possession meets the requirements of the
following European directives:
- EMC directive 2004/108/EC
- Low voltage directive 2006/95/EC
- Pressure equipment directive (PED) 97/23/EC
- ATEX directive 94/9/EC
Explosion
Protection
Identification for intended use in potentially explosive atmospheres according
to:
- ATEX directive (marking in addition to CE marking)
- IEC standards
- FM Approvals (US)
- cFM Approvals (Canada)
- NEPSI (China)
- GOST
Important (Notice)
All documentation, declarations of conformity, and certificates are available in ABB's download
area.
www.abb.com/flow