ABB FEX300 - Software History

Parameterization
128 FEX300, FEX500 OI/FEX300/FEX500-EN
7.6 Software history
7.6.1 Devices with HART protocol
Software D200S062U01
Software version Type of changes Operating instructions
00.01.01 Original Software OI/FEP300/FEH300 Rev. A
00.01.02 Function extension, incorporated
new HART commands
OI/FEP300/FEH300 Rev. A
00.02.00 Optimized measured value
processing
OI/FEP300/FEH300 Rev. B
00.02.01 Optimized measured value
processing
OI/FEP300/FEH300 Rev. B
00.02.04 Optimized boot sequence OI/FEP300/FEH300 Rev. B
Software D200S069U01
01.01.02 Optimized access to the service
menu.
Implemented TFE functionality
Added diagnostic functions and
batch mode
(for 500 series, only)
OI/FEP300/FEH300 Rev. C
7.6.2 Devices with PROFIBUS PA or FOUNDATION Fieldbus
Software D200S069U02 (PA) Software D200S069U03 (FF)
Software version Type of changes Operating instructions
00.01.02 Original software for
PROFIBUS PA, FOUNDATION
Fieldbus
OI/FEP300/FEH300 Rev. C