Parameterization
OI/FEX300/FEX500-EN FEX300, FEX500 127
Parameter Description
Process Alarm (continued)
... / Alarm Simulation
30-Hold Last Value Simulate "Hold last good value" error
32-Digi-Pot Error Simulate "Digital potentiometer" error
33-TFE Simulate "Partial filling alarm" error
34-CurrentOut Error Simulate "Loop current output interrupted" error
35-Not Calibrated Simulate "Not calibrated" error
36-SensorIncompatib. Simulate "Calibration mode incompatible" error
37-ROM Error Simulate ROM error in the transmitter
38-RAM Error Simulate RAM error in the transmitter
39-Sim. HART Freq. Simulate a HART frequency
40-SIL Simulate "Self check alarm" error
41-Conductivity Simulate "Conductivity alarm" error
42-Elec.Coated Simulate "Electrode deposits" error
43-Gas bubble Simulate "Gas bubbles" error
44-Pulse Cut Off Simulate "Pulse output" error
46-Sensor Temp Simulate "Sensor temperature alarm" error
To Next Page
Loading...
