ABB FSM4000 - Page 39

FSM4000 ELECTROMAGNETIC FLOWMETER | DS/FSM4000-EN REV. L
39
Adapter for variable process connections DN 3 to 100 (1/8” to 4”)
All specified dimensions and weights are in mm (in) or kg (lb).
1
Pipe fitting in accordance with DIN 11851
2
Tri-clamp
Figure 28: Adapter for variable process connections DN 3 to 100
Threaded pipe connection in acc. with DIN 11851
Nominal
diameter
Pressure rating
L (old
*
)
L (new
**
)
Thread
Ø Di
Weight
DN
3 to DN 10
(⅛ bis ⅜”)
See the chapter titled
Material loads for
process
connections
on page
13
169 (6.65)
—
28 x
1/8”
10 (0.39)
0.5 (1.1)
DN
15 (½”) 34 x
1/8”
16
(0.63)
DN 20 (¾”)
180 (7.09)
—
44 x 1/6”
20 (0.79)
0.9 (2.0)
DN
25 (1”)
207 (8.15)
—
52 x
1/6”
26 (1.02)
DN 32 (1 ¼”)
230 (9.06)
—
58 x 1/6”
32 (1.26)
1.4 (3.1)
DN
40 (1 ½”)
237 (9.33)
—
65 x
1/6”
38 (1.50)
DN 50 (2”)
243 (9.57)
—
78 x 1/6”
50 (1.97)
DN
65 (2 ½”)
245 (9.65)
330.5 (13.01)
96 x
1/6”
66 (2.60)
2.2 (4.9)
DN 80 (3”)
259 (10.20)
344.5 (13.56)
110 x 1/4”
81 (3.19)
3.2 (7.1)
DN
100 (4”)
307 (12.09)
412.5 (16.24)
130 x
1/4”
100 (3.94)
4.4 (9.7)
* Old installation length for replacement purposes only. Please observe ordering information.
** New installation length.