ABB FSM4000 - Page 44

44
FSM4000 ELECTROMAGNETIC FLOWMETER | DS/FSM4000-EN REV. L
—
… Model SE21_
Main order number
Electromagnetic Flowmeter FSM4000
SE21F-
X XXX X X X X
X
X
X
X
X
X
X
X
XXX XXX
Temperature Range
Standard design (<= 130 °C [266 °F])
S
Certif
icates
PED Standard
A
Material certificate 3.1 acc. EN 10204 with pressure test acc. AD2000
D
4)
Pressure test acc. AD2000
G
Inspection certificate 3.1 acc. EN 10204
F
Calibration Certificates
Standard
A
Fingerprint saved at factory
F
5)
Type of Protection / Cable Entry
IP 67 / Thread for screw
-type conduit fitting M20 x 1.5 2
IP 67 / Thread for screw
-type conduit fitting NPT 1/2 in 4
IP 68 / Thread for screw
-type conduit fitting M20 x 1.5 7
6)
IP 68 / Cable connected and connection box potted
8
Design
Without pre
-amplifier 1
7)
With pre
-amplifier type A 2
8)
With pre-amplifier type B
4
9)
Name Plate Language / Type
German / Adhesive foil
G
English / Adhesive foil
E
French / Adhesive foil
F
German / Stainless steel
J
English / Stainless steel
K
French / Stainless steel
L
Design Level
(Specified by ABB)
x
Electrode Design
Standard
1
Conical head, AISI 904L SST (1.4539)
2
10)
4) Material certificate for meter tube and flanges
5) DN 8 (5/16 in)
6) Sealing compound (optional): D141B038U01
7) From DN 10 (3/8 in) >= 20 μS/cm
8) Standard up to DN 8 (5/16 in) >= 20 μS/cm, > DN 8 (5/16 in) >= 5 μS/cm and lay length max. 200 m (660 ft)
9) Option: Up to DN 8 (5/16 in) >= 5 µS/cm, > DN 8 (5/16 in) >= 0.5 µS/cm and lay length max. 200 m (660 ft)
10) For application e.g. with high fat contents
Continued on next page