ABB FSM4000 - Device Configuration

48
FSM4000 ELECTROMAGNETIC FLOWMETER | DS/FSM4000-EN REV. L
—
… Model SE21_
Main order number
Electromagnetic Flowmeter FSM4000
SE21-
X
XXX
X
X
X
X
X
X
X
X
X
X
X
X
X
XXX
XXX
Pressure Rating
PN 10
C
PN 16
D
PN 40
F
ASME CL 150
P
ASME CL 300
Q
Material of Process Connection
Without
0
AISI 316Ti SST (1.4571)
3
AISI 316L SST (1.4404)
4
Accessories
Without
A
6)
With fastening element
C
7)
Temperature Range
Standard design (<= 130 °C [266 °F])
S
Certificates
PED Standard
A
Material certificate 3.1 acc. EN 10204 with pressure test AD2000
D
8)
Pressure test AD2000
G
Inspection certificate 3.1 acc. EN 10204
F
Calibration Certificates
Standard
A
Fingerprint saved at factory
F
9)
Type of Protection / Cable Entry
IP 67 / Thread for screw-type conduit fitting M20 x 1.5
2
IP 67 / Thread for screw
-type conduit fitting NPT 1/2 in 4
IP 68 / Thread for screw
-type conduit fitting M20 x 1.5 7
10)
IP 68 / Cable connected and connection box potted
8
Design
Without pre
-amplifier 1
11)
With pre
-amplifier type A 2
12)
With pre
-amplifier type B 4
13)
6) > DN 2 (1/12 in)
7) No 3-A conformity
8) From DN 3 (1/10 in)
9) From DN 10 (3/8 in)
10) Sealing compound (optional): D141B038U01
11) From DN 10 (3/8 in) >= 20 μS/cm
12) Standard up to DN 8 (5/16 in) >= 20 μS/cm, > DN 8 (5/16 in) >= 5 μS/cm and cable length max. 200 m (660 ft)
13) Option: Up to DN 8 (5/16 in) >= 5 µS/cm, > DN 8 (5/16 in) >= 0.5 µS/cm and cable length max. 200 m (660 ft)
Continued on next page