ABB IRB 2600ID-8/2.0 - Replacing the Brake Release Board

4.3.5 Replacing the brake release board
Location of brake release board
The brake release board is located as shown in the figure.
xx0900000101
Brake release boardA
Connectors on push-button board
The connectors X8, X9 and X10 are placed on the push-button board as shown in
the figure below.
X9
X8
X10
xx1700000978
Continues on next page
240 Product manual - IRB 2600
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.3.5 Replacing the brake release board