4 Repair
4.3.7. Replacement of air nipple and hose (Foundry Prime)
2433HAC026876-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
Required equipment
Pos 1G Hose length 250 mm
Pos 1H Hose length 540 mm
Pos 1K Hose length 4020 mm
Pos 1L Hose length 195 mm
Pos 1M Hose length 40 mm
Pos 1N Hose length 40 mm
Pos 1P Hose length 1605 mm
Pos 1Q Hose length 100 mm (for option 2.8 m/185 kg: 350 mm)
Pos 1R Hose length 1490 mm (for option 2.8 m/185 kg: 1740 mm)
Pos 1S Hose length 570 mm
Pos 1T Hose length 100 mm
A Pneumatic hose
B Y-plug connector
C T-plug connector
a Balancing cylinder, rear end
b Motor axis 1
c Battery cover
d Motor axis 2
e Length = Pos 1S
f Motor axis 6
g Rubber clamp on attachment plate (tilthouse)
h Rubber clamp on wrist cover
j Motor axis 5
k Motor axis 3
m Motor axis 4
n Bulkhead plug connector in plate at base
Equipment Art. no. Pos. in illustration
Velcro strap 3HAC12625-1 9 (only in illustrations below)
Cable straps 21662055-3 8 (only in illustrations below)
Elbow fitting 3HAC026511-001 6 (only in illustrations below)
Rubber clamp 3HAC026523-001 5
T-plug connector 3HAC026515-001 4
Y-plug connector 3HAC026514-001 3
Bulkhead plug connector 3HAC026513-001 2
Hose 3HAC026526-001 1
Continued
Continues on next page
To Next Page
Loading...
