ABB IRB 6650 - 125/3.2 - Page 55

Description
Product Specification IRB 6600 M2000 51
Table for Spot Welding with option 2064 and Profibus
* Terminals inside the cabinet if option 057 is chosen
** At manipulator base or axis 3 interface (or axis 6 under option 2205)
Option 2065 Extended media
The process cable package from foot to axis 6 can be extended with an extra media
hose. This could only be chosen in combination Spot welding application (with option
2200, all variants shown in Table 12, Table 13, Table 14, Table 15 and Table 16). This
option has the following specification:
- Hose 1/2" (Proc 4) with connection (Parker Pushlock reference 3C382-15-
8BK, brass version) both at foot and at axis 3. At axis 6 with free end.
Option 2070 Connection kit, Axis 6 robot side SW
The process cable package from manipulator base to axis 6 (option 2200) ends with
free end for media and for weld power cable. If this option is chosen a kit for
connections will be supplied. This has to be assembled by the customer when hoses and
power cable has been cut to required length. The kit contains:
- 4 Hose fittings, Parker Push lock type with conical angel 24 Degrees (Parker
Pushlock reference 3C382-15-8BK, brass version).
- 1 Multi contact connector (Female).
Table 16
Type Pcs at
Terminal*
Pcs at Connection
point**
Allowed capacity
Customer Power (CP)
Utility Power
Protective earth
2+2
1
2+2
1
500 VAC, 5 A rms
500 VAC
Customer Bus (CBus)
Bus signals
Bus signals
Signals twisted pair
Utility signals
4
4
2
2
4
4
Profibus 12Mbit/s spec
50 VAC, 1 A rms
50 VAC, 1 A rms
50 VAC, 1 A rms