ABB IRC5 Startup Guide

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 11 - Appendix A: Setting Up Forge/OS | 34
k. Confirm that you want to erase the entire disk by clicking Continue.
l. Make a note of the pendant instructions. If you're using a Forge/Ctrl, select the checkbox next to This
hardware is a Forge CTRL.
m. Choose your timezone. Then click Continue.

ABB IRC5 Specifications

General

Type	Industrial Robot Controller
Model	IRC5
Protection Class	IP54
Power Supply	200-600 VAC, 50/60 Hz
Communication Protocols	PROFIBUS, PROFINET, DeviceNet
Programming Language	RAPID
Number of axes	Up to 36
Storage Temperature	-25°C to +55°C
Relative Humidity	95% (non-condensing)