EasyManuals Logo

ABB IRC5 Startup Guide

ABB IRC5
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 11 - Appendix A: Setting Up Forge/OS | 38
The UI shows the real-time state of each step. For example, if the pendant loses its network connection
during pairing, all steps become undone. If the READY pendant spends more than 60 seconds on any step,
troubleshooting text displays. Common things to check are if the READYpendant network cable is plugged in, if
the IPC is powered on, if the READYpendant and IPC are connected to the same network, and if there’s only one
READYpendant and one IPC on that network.
Note:
The READYpendant IP Address is preset to 172.16.255.253. The network interface that the pendant
connects to should use IP Address 172.16.255.250 and Oubnet mask 255.255.255.0.
3. Tap Admin and sign in. The default Admin password is "forgeadmin".
Note:
After installation, you have limited access to ForgeO until you activate it with a license code. Oee Activating
ForgeO with a License Code (on page 39).

Other manuals for ABB IRC5

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ABB IRC5 and is the answer not in the manual?

ABB IRC5 Specifications

General IconGeneral
TypeIndustrial Robot Controller
ModelIRC5
Protection ClassIP54
Power Supply200-600 VAC, 50/60 Hz
Communication ProtocolsPROFIBUS, PROFINET, DeviceNet
Programming LanguageRAPID
Number of axesUp to 36
Storage Temperature-25°C to +55°C
Relative Humidity95% (non-condensing)

Related product manuals