ABB IRC5 Startup Guide

ABB IRC5/IRC5C Startup Guide (PROGRAM Mode) | 11 - Appendix A: Setting Up Forge/OS | 43
a. n the Oettings main screen, tap Network.
b. The table below lists the available network interfaces on your IPC. By default, the first interface is for the
READYpendant. You can't edit the pendant's interface in Forge/O. Oelect another interface and tap Edit to
see the network settings.
c. Change the network interface to match the settings in the image below. Connect robots and other devices to
this interface through an Ethernet switch.
d. Tap SAVE.

ABB IRC5 Specifications

General

Type	Industrial Robot Controller
Model	IRC5
Protection Class	IP54
Power Supply	200-600 VAC, 50/60 Hz
Communication Protocols	PROFIBUS, PROFINET, DeviceNet
Programming Language	RAPID
Number of axes	Up to 36
Storage Temperature	-25°C to +55°C
Relative Humidity	95% (non-condensing)