ABB LST400 - 5 Configuration Distance; Level

LST400 | ULTRASONIC LEVEL TRANSMITTER | OI/LST400-EN REV. E
8
5 Configuration distance / level
DISTANCE / LEVEL MODE
BASIC OPTIONS DEFAULTS
SECURITY CODE  
MODE DISTANCE/LEVEL/FLOW/DIFF DISTANCE
UNITS FEET/METERS FEET
EMPTY DISTANCE  
SPAN  
BLANKING  
RATE OF CHANGE  
APPLICATION LIQUIDS/SOLIDS LIQUIDS
FACTORY RESET NO/YES NO
TEMPERATURE COMPENSATION OFF/ON OFF
SIMULATE NO/YES NO
SET PASSWORD NO/YES NO
BACKLIGHT  
LOSSTIME  
FAILSAFE  HOLD
ENGINEERING UNITS  NONE
MAXIMUM VALUE  
DECIMAL POINT  
ZERO OFF SET  
SETUP RELAYS NO/YES NO
 OFF/LO/HI OFF
CHANNEL SELECT ONE/TWO/BOTH ONE
SETPOINT SPAN 
PUMP CYCLE OFF/FIFO/ROTATE OFF
CLEAR RELAYS NO/YES NO
SETUP LINEARIZER NO/YES NO
ACTIVATE LINEARIZER NO/YES NO
SETPOINT  
HEIGHT  
PERCENTAGE  