Pos: 79 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Überschriften ( --> Für alle Doku mente <--)/1. Ebene/M - O/Montage / I nstallation @ 18\ mod_130261 3966111_15.doc x @ 103373 @ 1 @ 1
6 Mounting / Installation
Pos: 80 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Sicherheit (--> Für alle Doku mente <--)/Warnhin weise/Sicherh eit - Niederspan nungs- und 230 V-Leitungen @ 18\mod_1 302617821491 _15.docx @ 10 3465 @ @ 1
Electric voltage!
Risk of death and fire due to electrical voltage of 100-240 V.
– Low-voltage and 100-240 V cables must not be installed together
in a flush-mounted socket!
In case of a short-circuit there is the danger of a 100-240 V load
on the low-voltage line.
Pos: 81 /Busc h-Jaeger (Ne ustruktur)/Modul- Struktur/Onlin e-Dokumentati on/Sicherheit (--> Für alle Doku mente <--)/Warnhin weise/Sicherh eit - Fachkennt nisse @ 18\mo d_130277438 4017_15.docx @ 103564 @ 2 @ 1
6.1 Requirements for the electrician
Install the device only if you have the necessary electrical engineering
knowledge and experience.
• Incorrect installation endangers your life and that of the user of
the electrical system.
• Incorrect installation can cause serious damage to property, e.g.
due to fire.
The minimum necessary expert knowledge and requirements for the
installation are as follows:
• Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect from power;
2. Secure against being re-connected;
3. Ensure there is no voltage;
4. Connect to earth;
5. Cover or barricade adjacent live parts.
• Use suitable personal protective clothing.
• Use only suitable tools and measuring devices.
• Check the type supply network (TN system, IT system, TT system)
to secure the following power supply conditions (classic
connection to ground, protective earthing, necessary additional
measures, etc.).
To Next Page