MegaFlex 1000 to 1600 UPS User Manual / REV-A
6.6 RPA Parallel System
RPA Parallel System
(option)
The RPA PARALLEL SYSTEM is entered any
time the “RPA” key is pressed.
This screen is only displayed when the
Parallel System is available (option).
The LCD screen will provide some
information on the RPA Parallel System.
In this mode the keys perform the following functions:
Shows the main screen MEASURES.
See Section 6.2.
Shows the main screen EVENTS.
See Section 6.3.
Shows the main screen SETUP.
See Section 6.4.
Shows the main screen COMMANDS.
See Section 6.5.
Return to HOME screen.
Key to reset general alarm and buzzer.
Shows the screen for the next RPA Parallel System units
Shows the screen of the previous RPA Parallel System units.
To Next Page
Loading...
