ABB MNS-SG - Page 5

Manual | MNS-SG Operation and Maintenance 5
Anyone using service procedures or tools, whether or not
recommended by ABB, must satisfy himself or herself
thoroughly that neither personal safety nor equipment
safety will be jeopardized by the service method or tools
selected.
Should further information be required or specific problems
arise that are not sufficiently covered, refer the matter to an
ABB service representative.
The purchaser, installer or ultimate user is responsible for
ensuring that warning signs are attached and all access
doors and operating handles are securely locked when the
gear is left unattended, even momentarily.
All information contained in this manual is based on the
latest product information available at the time of printing.
The manufacturer reserves the right to make changes at
any time without notice.
Safety notations alert personnel to possible death, injury, or
property damage situations. The following four safety
notations and words are used in the manual to indicate the
degree of hazard that may be encountered by the user. These
words and safety notations are as follows:
“Danger” – Indicates an imminently hazardous situation which is not avoided
and has a high probably of death or serious injury and substantial property
damage.
! DANGER
“Warning” – Indicates a potential hazardous situation which is not avoided and
has some probably of death or serious injury and substantial property damage.
! WARNING
“Caution” – Indicates a potential hazardous situation which is not avoided and
has a minor or moderate probably of death or serious injury and substantial
property damage.
! CAUTION
“Notice” – Indicates a statement of company policy as it relates directly to the
safety of personnel or protection of property.
! NOTICE