19 | © 2022 ABB | - 1SDH002203A1002
ABB | E-kit
Web interface configuration
8 - Web interface configuration
Access as Admin user
To configure the web interface, you must access the first time as Admin user.
1. Click on Login in the homepage header, enter the Admin user password (“Admin” by default) and click
on Login.
Enter of the Admin user password accesses the system with administrator rights and opens the window
below.
2. To change the password, enter the new password in Password and click on Change password. After
this operation, the words “Password changed” will appear under the button.
3. Click on Logout to return to the Guest user mode.
Note: after 30 minutes of inactivity, the system will automatically logout from Admin user to Guest user.
4. Click on Close to access the web interface as Admin user.
Save changes
Note: function only available for Admin users
1. Click on button to save the changes made to the system configuration: a window will open with a
request for confirmation before saving.
2. Click on Save to save the changes locally: the icon in the button becomes . Click on Cancel to
cancel saving.
To Next Page
Loading...
