ABB | E-kit
28 | © 2022 ABB | - 1SDH002203A1002 Integration with Ekip Connect 3
10 - Integration with Ekip Connect 3
Note: function only available for E-kit versions 3.2.11.0, 3.3.1.0 or higher.
E-kit with Ekip Connect 3
Ekip Connect 3 allows you to communicate with E-kit and access its web interface.
Requirements
Download Ekip Connect here to integrate E-kit using the Ekip Connect desktop solution.
Consult the manual for further information about Ekip Connect and how to install it.
Procedure
1. Access the Connection to devices area in the homepage of Ekip Connect and click on link to connect
a device in the manual mode
2. Set the following fields in the Add device window:
• Type of device: E-kit
• Slave address 1
• Communication protocol: Modbus TCP
• IP address: address of E-kit set during the configuration process (see Setting of static IP address
(recommended)
To Next Page
Loading...
