3.1.5 Softstarter overview
Settings can be done via Keypad and Fieldbus
communication.
With the keypad, settings can be set as individual
parameter settings or as a selection of predefined
parameters for different applications.
Most parameters have one possible setting, but some
parameters have extra settings for sequence start. The
default parameter settings are stored in the unit so that a
reset to default can be done at any time.
When the fieldbus communication is selected, most
parameters can also be modified from this interface.
Overview, See Figure 8.
Ready
Run Fault
Protection
Com1 Com2
4T22T1 6T3
3L21L1 5L3
PSTX
L
100-250V
50/60 Hz K4 K5 K6
Start StopIn1 In2DGND+24VGND
N
In0
8
1SFC132081M0201
Figure. 8: Softstarter overview
Symbol for
Torque control
Anybus
connection
(Com2)
Supply voltage Us
Order code
Technical data
according to UL 508
Fieldbus connection (Com1)
Motor side connection
Terminal marking of
control circuits
Line side connection
Display
Keypad
Mini USB
Country of origin
Utilization code
Approvals
Terminal marking of
control circuits
Protection (Yellow)
Fault (Red)
Technical data
accordning to
IEC 60 947-4-2
Ready (Green)
Run (Green)
3
To Next Page
Loading...
