Input connection to PV generator (DC side)
Once preliminary checks have been carried out and no problems found
with the photovoltaic system, and the channel conguration has been se-
lected (parallel or independent) you may connect the inputs to the inverter.
When the photovoltaic panels are exposed to sunlight they provide continuous DC voltage to
the inverter. To avoid risks of electrical shock, all wiring operations must be carried out with
the DC disconnect switch (internal or external to the inverter) off.
To connect the strings, you will need the quick t connectors (Weidmüller
or Multi-Contact) located on the lower part of the mechanics.
The number of quick t connectors varies in accordance with the number
of input channels.
17 18
To Next Page
Loading...
