27
450
413
A
B
Min 50 mm spacing
between two kits
50 mm space needed
above and below
the frame for rotating
A040178
Fig. 4.7.-2 Wall-mounted relay in pulled-out position and rotated
A) Locks the relay to selected position (pushed-in or pulled-out)
B) Knurled-head screw
4.8. 19" rack mounting with RTXP 18
The relay can be mounted together with a RTXP 18 test switch to a 19" rack
by using a mounting kit. For order number, refer to Chapter 6. Accessories.
The mounting kit contains:
*
Mounting panel (item 1 in Fig. 4.8.-1)
*
Metallic frame (item 2 in Fig. 4.8.-1) for mounting the RTXP 18 test
switch to the panel
A device equipped with optic connections requires a minimum
depth of 180 mm.
For instructions on how to mount the case to the panel, refer to
Section 4.3. Flush mounting.
1MRS752265-MUM
Protection Relay
Installation Manual
RE_ 610
To Next Page
Loading...
