For instructions on how to mount the case to the angled frame, refer to
Section 4.3. Flush mounting.
4.6. Rack mounting
The relay can be mounted to a 19" rack by using a mounting panel. The
required mounting panel type depends on the number of relays mounted. For
order numbers, refer to Chapter 6. Accessories.
A device equipped with optic connections requires a minimum
depth of 180 mm.
19 (482,6)
4U (177)
A040172
Fig. 4.6.-1 19” rack mounting panels
For instructions on how to mount the case to the panel, refer to
Section 4.3. Flush mounting.
24
RE_ 610
Protection Relay
Installation Manual
1MRS752265-MUM
To Next Page
Loading...
