ABB RE 610 Series - Lens Sensors for Arc Protection System (REF 610 Only)

29
1
1
A040180
Fig. 4.9.-1 Mounting the relay to a 19" equipment frame
1) Mounting bracket type 1MRS061208

A040181
Fig. 4.9.-2 Mounting the relay and test switch RTXP 18 to a 19" equipment
frame
1) Mounting bracket type 1MRS061208
2) Mounting bracket type 1MRS061207
4.10. Lens sensors for arc protection system (REF 610 only)
The arc protection is used to detect arc situations in air insulated metal-clad
switch gears.
The place of installation of the optional lens sensors in the switch gear cubicle
depends on the kind of arc protection system to be used. Refer to the
application examples in the Technical Reference Manual for further
information on the alternatives.
1MRS752265-MUM
Protection Relay
Installation Manual
RE_ 610