ABB REB500 - File Menu

Section 3 1MRK 500 124-UEN
HMI500
14 Operation Manual
Distributed busbar protection REB500
3 HMI:
[IP:Port]
Active Ethernet interface (on the device front), the IP address and the port
connected for the target communication
LAN0:
[IP:Port]
Active Ethernet interface communication over station bus, the IP address
and the port connected for the target communication
4 Edit Permits settings to be saved in a file or downloaded to the protection
system.
Read-Only It is only possible to read data.
5 Test Test generator is activated.
Test generator not active
6 Install Installation mode is active (debug mode is inactive)
Install/Debug Installation mode and Debug mode are active
Debug Debug mode is active (Installation mode is inactive)
7 <Setfile> Path and name of the currently open setfile.
8 <action> short message of an ongoing action
3.4 File menu
Table 4 summarizes the options available in this menu. The subsequent subsections
describe the menu items “Download to protection system…” and “Compare…” in
greater detail.
Table 4 Menu items in menu File
Menu Item Description
Open… Opens a database file stored on the computer’s file system.
Save as… Saves the currently open database to the computer’s file system.
Upload from
protection system…
Saves a database from the protection system to the computer’s file system.
Download to
protection system…
Sends a database file from the computer’s file system to the protection
system.
Compare… Compares a database file on the computer’s file system to the database of
the protection system or to another database file on the computer’s file
system.
Exit Terminates the program; displays a warning if there are changes that have
not been saved. You then have the choice of saving or discarding them.